Xtronsi ametlik edasimüüja

7" Wireless Camera System set with 1 LCD + 1 Camera + Video Transmitter

Brand: NVOX
Delivery time: 5 - 7 working days
67,00 €
Qty.: - +
   - or -   

Lcd7 wireless reversing camera set



The camera and monitor are automatically turned on when voltage is detected. You don't have to bother looking for the right buttons.
The camera lens is vertically adjustable - you can set it and mount it at any height.
The webcam is fully waterproof and shockproof. She is not afraid of difficult working conditions.
Two 2.4 GHz video transmitters included - no need to run cables the entire length of the vehicle. The image from the webcam to the monitor is transmitted wirelessly, which makes installation quick and completely hassle-free!
It is also possible to connect the webcam by wire (for longer distances you will need an additional RCA video cable - Chinch-Chinch).
Camera Specs:


Viewing angle: 120 degrees
Image resolution: 800 x 480 pixels NTSC / PAL (WVGA)
IR lighting diodes: 18 pcs.
Mode: Day / Night (automatically switched - depending on the lighting conditions)
Built-in light / dusk sensor
Temperature resistance range (operation range): -40 to + 80 ° C
Video output: Composite - Composite Chinch
Power supply: 12V (the cables are already prepared to be connected to the vehicle's electrical system)
Maximum energy consumption: up to 120 mA
Mounting frame included!
Resistance class: IP66 - ideal for use inside and outside vehicles
Dimensions (with stand and hood): 75 mm x 69 mm x 72 mm
Monitor specification:


LCD screen diagonal: 7 inches
Contrast: 300: 1
Brightness: 250 cd / m2
Display mode: RGB color
Brightness, contrast and color adjustment function
Mirror, Pivot function
Image resolution: 800 x 480 pixels NTSC / PAL (WVGA)
2 independent video inputs (CH1 and CH2 channels): Composite Chinch
Temperature resistance range: -40 to + 80 ° C
Power supply: 12V (cables prepared to be connected to the installation)
Maximum power consumption: 6W
Dimensions: 11 cm x 17 cm x 2 cm


Camera with a mounting frame
7 "TFT LCD monitor
Tilting monitor holder + self-adhesive stand (vertically adjustable)
Mounting frame used to hang the monitor on the wall or in a previously prepared place in the vehicle dashboard
IR (remote control) remote for the monitor
Video transmitter: 2.4 GHz 8-14V
Video receiver: 2.4 GHz 8-14V
A full set of cabling


Similar products
SKU: CAMOPMK01 ,   Delivery time: 5 - 7 working days
29,00 €
SKU: HM 716 HD ,   Delivery time: 5 - 7 working days
56,00 €
SKU: 4PIN-20 ,   Delivery time: 5 - 7 working days
27,00 €